Lamination Station Military Orders 1-800-419-0247
 

ITEMS:   SUBTOTAL: $

   HELP  |  TRACKING   Laminating Service
Home > ID Camera Technical Help > How to load the film

Photo ID & Passport Camera Technical Help

How to Load the Film

Make sure that the white tabs are not caught between the film pack and camera back.SEE BELOW FOR MORE DETAIL

Load The Film - figure 1
Remove the film from the packaging. Handle the film only by the edges.
Straighten the white film tabs.

1) Insert the Film Pack as shown by first inserting the pack at an angle.

2) Then push forward until the film pack is fully seated. Make sure that the white
    film tabs are not caught between the film pack and camera back.

3) Now swing the Film Back Door into the closed position.

4) Relatch the door by moving the Film Back Door latch back into the
    latched position.


Before You Close the Film Back Door, Check And Make Sure That The Film Tabs Are Not Caught Between The Film Pack And Camera Back.
Load The Film - figure 2


Copyright 2005 by Lamination Station